JAPAN NACHI Bearing
This Nachi 6304-2NSE ball bearing is made of chrome steel, is double sealed, and has C3 internal clearance. It has a 20 mm inside diameter, a 52 mm outside diameter, and a 15 mm depth. This single-row ball bearing has deep groove geometry for applications that require high speeds and support both radial and axial loads.
This Nachi 6308-2NSE ball bearing is made of chrome bearing steel and has rubber seals. It has a 40 mm inside diameter, a 90 mm outside diameter, and a 23 mm depth The bearing has deep groove geometry for supporting both radial and axial loads and high speeds.
’
- NACHI 25TAB04 JAPAN Bearing 20*47*15
- 25 mm
- 2170 kgf
- NACHI 25TA B06 DF/GM JAPAN Bearing
- Two-Bolt Base
- 1.6250 in
- NACHI 25 RT59SNC3 JAPAN Bearing 25x59x24
- 0.7500 in
- 4410 lbf
- NACHI 24122EW33 JAPAN Bearing 110*180*69
- Mounted Units & Inserts
- 0.0
- NACHI 23056EW33K JAPAN Bearing 280*420*106
- Flange Block
- 0.0
- NACHI 23028 EW33 JAPAN Bearing 140*210*53
- 1.5000 in
- 2150 lbf
- NACHI 23022 / C3 JAPAN Bearing 110*170*45
- 85 mm
- 2150 lbf
- NACHI 22336 MC3 JAPAN Bearing 180×380×126
- 1.4375 in
- 5820 lbf
- NACHI 22330EXW33 JAPAN Bearing 150*320*108
- Mounted Units & Inserts
- 0.0
- NACHI 22330 MC3 JAPAN Bearing 150×320×108
- 17 mm
- 2150 lbf
- NACHI 22328 MC3 JAPAN Bearing 140×300×102
- 1.6875 in
- 2.1930 in