VSI201094N Internal Gear Teeth Slewing Bearing
| Series: | 93000 |
| Cone Part Number: | 93751D |
| Cup Part Number: | 93134 |
| Design Units: | Imperial |
| Bearing Weight: | 116.30 lb |
| Cage Type: | Stamped Steel |
| Aa - Cage-Cone Backface Clearance: | 0 in |
| d: | 7.5 in |
Product Details
| Series | 93000 |
| Cone Part Number | 93751D |
| Cup Part Number | 93134 |
| Design Units | Imperial |
| Bearing Weight | 116.30 lb |
| Cage Type | Stamped Steel |
| Aa - Cage-Cone Backface Clearance | 0 in |
| d | 7.5 in |
| D | 13.4132 in |
| B - Double Cone Width | 5.2500 in |
| C - Cup Width | 2.1125 in |
| T - Bearing Width across Cups | 5.8499 in |
| R - Cone Frontface To Clear Radius1 | 0.250 in |
| r - Cup Backface To Clear Radius2 | 0.250 in |
| da - Cone Frontface Backing Diameter | 8.74 in |
| Db - Cup Backface Backing Diameter | 11.77 in |
| Ab - Cage-Cone Frontface Clearance | 0.21 in |
| C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3 | 42600 lbf |
| C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4 | 286000 lbf |
| C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5 | 74200 lbf |
| Ca90 - Dynamic Thrust Rating (90 million revolutions)6 | 38200 lbf |
| K - Factor7 | 1.12 |
| e - ISO Factor8 | 0.52 |
| Y1 - ISO Factor9 | 1.29 |
| Y2 - ISO Factor10 | 1.92 |
| G1 - Heat Generation Factor (Roller-Raceway)11 | 912 |
| G2 - Heat Generation Factor (Rib-Roller End) | 126 |
| Cg - Geometry Factor12 | 0.146 |