282.30.1100.013 Slewing Table Bearing 1012x1300x90mm
| Cone Part Number: |
LL529749 |
| Design Units: |
Imperial |
| Cage Type: |
Stamped Steel |
| C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1: |
44300 lbf |
| C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2: |
11500 lbf |
| d: |
5.7500 in |
| B - Cone Width: |
0.8125 in |
| R - Cone Backface To Clear Radius3: |
0.06 in |
| PDF |
|
Product Details
| Cone Part Number |
LL529749 |
| Design Units |
Imperial |
| Cage Type |
Stamped Steel |
| C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1 |
44300 lbf |
| C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2 |
11500 lbf |
| d |
5.7500 in |
| B - Cone Width |
0.8125 in |
| R - Cone Backface To Clear Radius3 |
0.06 in |
| da - Cone Frontface Backing Diameter |
5.98 in |
| db - Cone Backface Backing Diameter |
6.1 in |
| Ab - Cage-Cone Frontface Clearance |
0.1 in |
| Aa - Cage-Cone Backface Clearance |
0.01 in |
| a - Effective Center Location4 |
0.37 in |
| C90 - Dynamic Radial Rating (90 million revolutions)5 |
6590 lbf |
| C1 - Dynamic Radial Rating (1 million revolutions)6 |
25400 lbf |
| C0 - Static Radial Rating |
48200 lbf |
| Ca90 - Dynamic Thrust Rating (90 million revolutions)7 |
4310 lbf |
| K - Factor8 |
1.53 |
| G1 - Heat Generation Factor (Roller-Raceway) |
248.3 |
| G2 - Heat Generation Factor (Rib-Roller End) |
185.9 |
| Cg - Geometry Factor |
0.156 |