Cross reference SR25-580LY RAIL THK Linear Bearing,Linear Motion Guides,Radial Type Caged Ball LM Guide (SSR),Radial Rail (SR) for SSR Blocks | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | d | E | T | D | C | F | m | |
| ARN4580 | NTN | - | 45,000 mm | - | 60,000 mm | 80,000 mm | - | - | - |
| ARN4580T2 | NTN | - | 45 mm | - | 60 mm | 80 mm | 25 mm | 50 mm | - |
| AXN4580 | NTN | - | 45 mm | - | 54 mm | 80 mm | 25 mm | 50 mm | - |
| YRT 580 | ISB | - | 580 mm | - | - | 750 mm | 30 mm | - | - |
| Z-580454.ZL-K-C5 | FAG | - | 190 mm | - | - | 320 mm | - | 215 mm | 38,2 kg / Weight |
| ZARN4580-L-TV | INA | ZMA45/68 / Designation of recommended INA locknut | 45 mm | - | - | 80 mm | 25 mm | - | 1,27 kg / Weight |
| ZARN4580-TV | INA | AM45 / Designation of recommended INA locknut | 45 mm | - | - | 80 mm | 25 mm | - | 1,12 kg / Weight |
| 135RIF580 | Timken | - | 342,9 mm | 435 mm | - | 457,2 mm | 57,15 mm | 365 mm | - |
| 135RIJ580 | Timken | - | 342,9 mm | 435 mm | - | 457,2 mm | 57,15 mm | 365 mm | - |
| 135RIN580 | Timken | - | 342,9 mm | 435 mm | - | 457,2 mm | 57,15 mm | 365 mm | - |
| 135RIT580 | Timken | - | 342,9 mm | 435 mm | - | 457,2 mm | 57,15 mm | 365 mm | - |
| SSR20XW1SS BLOCK THK Linear Bearing,Linear Motion Guides,Radial Type Caged Ball LM Guide (SSR),SSR-XW Block | Bearing number:7200 ACD/HCP4A; Size (mm):30x10x9; Bore Diameter (mm):30; Outer Diameter (mm):10; Width (mm):9; d:10 mm; D:30 mm; B:9 mm; d1:17.3 mm; d2:17.3 mm; D1:23.1 mm; r1,2 - min.:0.6 mm; r3,4 - min.:0.3 mm; a:9.3 mm; da - min.:14.2 mm; db - min.:14.2 mm; Da - max.:25.8 mm; Db - max.:27.6 mm; ra - max.:0.6 mm; rb - max.:0.3 mm; dn:18.3 mm; Basic dynamic load rating - C:4.4 kN; Basic static load rating - C0:1.9 kN; Fatigue load limit - Pu:0.078 kN; Limiting speed for grease lubrication:63000 r/min; Limiting speed for oil lubrication:95000 mm/min; Ball - Dw:4.762 mm; Ball - z:10; Gref:0.357 cm3; Calculation factor - e:0.68; Calculation factor - Y2:0.87; Calculation factor - Y0:0.38; Calculation factor - X2:0.41; Calculation factor - Y1:0.92; Calculation factor - Y2:1.41; Calculation factor - Y0:0.76; Calculation factor - X2:0.67; Preload class A - GA:27 N; Preload class B - GB:54 N; Preload class C - GC:108 N; Preload class D - GD:216 N; Calculation factor - f:1.02; Calculation factor - f1:0.99; Calculation factor - f2A:1; Calculation factor - f2B:1.01; Calculation factor - f2C:1.03; Calculation factor - f2D:1.06; Calculation factor - fHC:1.01; Preload class A:39 N/micron; Preload class B:50 N/micron; Preload class C:66 N/micron; Preload class D:87 N/micron; d1:17.3 mm; d2:17.3 mm; D1:23.1 mm; r1,2 min.:0.6 mm; r3,4 min.:0.3 mm; da min.:14.2 mm; db min.:14.2 mm; Da max.:25.8 mm; Db max.:27.6 mm; ra max.:0.6 mm; rb max.:0.3 mm; dn:18.3 mm; Basic dynamic load rating C:4.36 kN; Basic static load rating C0:1.86 kN; Fatigue load limit Pu:0.078 kN; Attainable speed for grease lubrication:63000 r/min; Attainable speed for oil-air lubrication:95000 r/min; Ball diameter Dw:4.762 mm; Number of balls z:10; Reference grease quantity Gref:0.357 cm³; Preload class A GA:27 N; Static axial stiffness, preload class A:39 N/µm; Preload class B GB:54 N; Static axial stiffness, preload class B:50 N/µm; Preload class C GC:108 N; Static axial stiffness, preload class C:66 N/µm; Preload class D GD:216 N; Static axial stiffness, preload class D:87 N/µm; Calculation factor f:1.02; Calculation factor f1:0.99; Calculation factor f2A:1; Calculation factor f2B:1.01; Calculation factor f2C:1.03; Calculation factor f2D:1.06; Calculation factor fHC:1.01; Calculation factor e:0.68; Calculation factor (single, tandem) Y2:0.87; Calculation factor (single, tandem) Y0:0.38; Calculation factor (single, tandem) X2:0.41; Calculation factor (back-to-back, face-to-face) Y1:0.92; Calculation factor (back-to-back, face-to-face) Y2:1.41; Calculation factor (back-to-back, face-to-face) Y0:0.76; Calculation factor (back-to-back, face-to-face) X2:0.67; Mass bearing:0.029 kg; |
| SRS12WNUU BLOCK THK Linear Bearing,Linear Motion Guides,Miniature Caged Ball LM Guide (SRS),SRS-WN Block | Bearing number:7200 ACD/HCP4A; Size (mm):30x10x9; Bore Diameter (mm):30; Outer Diameter (mm):10; Width (mm):9; d:10 mm; D:30 mm; B:9 mm; d1:17.3 mm; d2:17.3 mm; D1:23.1 mm; r1,2 - min.:0.6 mm; r3,4 - min.:0.3 mm; a:9.3 mm; da - min.:14.2 mm; db - min.:14.2 mm; Da - max.:25.8 mm; Db - max.:27.6 mm; ra - max.:0.6 mm; rb - max.:0.3 mm; dn:18.3 mm; Basic dynamic load rating - C:4.4 kN; Basic static load rating - C0:1.9 kN; Fatigue load limit - Pu:0.078 kN; Limiting speed for grease lubrication:63000 r/min; Limiting speed for oil lubrication:95000 mm/min; Ball - Dw:4.762 mm; Ball - z:10; Gref:0.357 cm3; Calculation factor - e:0.68; Calculation factor - Y2:0.87; Calculation factor - Y0:0.38; Calculation factor - X2:0.41; Calculation factor - Y1:0.92; Calculation factor - Y2:1.41; Calculation factor - Y0:0.76; Calculation factor - X2:0.67; Preload class A - GA:27 N; Preload class B - GB:54 N; Preload class C - GC:108 N; Preload class D - GD:216 N; Calculation factor - f:1.02; Calculation factor - f1:0.99; Calculation factor - f2A:1; Calculation factor - f2B:1.01; Calculation factor - f2C:1.03; Calculation factor - f2D:1.06; Calculation factor - fHC:1.01; Preload class A:39 N/micron; Preload class B:50 N/micron; Preload class C:66 N/micron; Preload class D:87 N/micron; d1:17.3 mm; d2:17.3 mm; D1:23.1 mm; r1,2 min.:0.6 mm; r3,4 min.:0.3 mm; da min.:14.2 mm; db min.:14.2 mm; Da max.:25.8 mm; Db max.:27.6 mm; ra max.:0.6 mm; rb max.:0.3 mm; dn:18.3 mm; Basic dynamic load rating C:4.36 kN; Basic static load rating C0:1.86 kN; Fatigue load limit Pu:0.078 kN; Attainable speed for grease lubrication:63000 r/min; Attainable speed for oil-air lubrication:95000 r/min; Ball diameter Dw:4.762 mm; Number of balls z:10; Reference grease quantity Gref:0.357 cm³; Preload class A GA:27 N; Static axial stiffness, preload class A:39 N/µm; Preload class B GB:54 N; Static axial stiffness, preload class B:50 N/µm; Preload class C GC:108 N; Static axial stiffness, preload class C:66 N/µm; Preload class D GD:216 N; Static axial stiffness, preload class D:87 N/µm; Calculation factor f:1.02; Calculation factor f1:0.99; Calculation factor f2A:1; Calculation factor f2B:1.01; Calculation factor f2C:1.03; Calculation factor f2D:1.06; Calculation factor fHC:1.01; Calculation factor e:0.68; Calculation factor (single, tandem) Y2:0.87; Calculation factor (single, tandem) Y0:0.38; Calculation factor (single, tandem) X2:0.41; Calculation factor (back-to-back, face-to-face) Y1:0.92; Calculation factor (back-to-back, face-to-face) Y2:1.41; Calculation factor (back-to-back, face-to-face) Y0:0.76; Calculation factor (back-to-back, face-to-face) X2:0.67; Mass bearing:0.029 kg; |
| SHS35-2840L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard Caged Ball LM Guide (SHS),Standard Rail (SHS) | Bearing number:7200 ACD/HCP4A; Size (mm):30x10x9; Bore Diameter (mm):30; Outer Diameter (mm):10; Width (mm):9; d:10 mm; D:30 mm; B:9 mm; d1:17.3 mm; d2:17.3 mm; D1:23.1 mm; r1,2 - min.:0.6 mm; r3,4 - min.:0.3 mm; a:9.3 mm; da - min.:14.2 mm; db - min.:14.2 mm; Da - max.:25.8 mm; Db - max.:27.6 mm; ra - max.:0.6 mm; rb - max.:0.3 mm; dn:18.3 mm; Basic dynamic load rating - C:4.4 kN; Basic static load rating - C0:1.9 kN; Fatigue load limit - Pu:0.078 kN; Limiting speed for grease lubrication:63000 r/min; Limiting speed for oil lubrication:95000 mm/min; Ball - Dw:4.762 mm; Ball - z:10; Gref:0.357 cm3; Calculation factor - e:0.68; Calculation factor - Y2:0.87; Calculation factor - Y0:0.38; Calculation factor - X2:0.41; Calculation factor - Y1:0.92; Calculation factor - Y2:1.41; Calculation factor - Y0:0.76; Calculation factor - X2:0.67; Preload class A - GA:27 N; Preload class B - GB:54 N; Preload class C - GC:108 N; Preload class D - GD:216 N; Calculation factor - f:1.02; Calculation factor - f1:0.99; Calculation factor - f2A:1; Calculation factor - f2B:1.01; Calculation factor - f2C:1.03; Calculation factor - f2D:1.06; Calculation factor - fHC:1.01; Preload class A:39 N/micron; Preload class B:50 N/micron; Preload class C:66 N/micron; Preload class D:87 N/micron; d1:17.3 mm; d2:17.3 mm; D1:23.1 mm; r1,2 min.:0.6 mm; r3,4 min.:0.3 mm; da min.:14.2 mm; db min.:14.2 mm; Da max.:25.8 mm; Db max.:27.6 mm; ra max.:0.6 mm; rb max.:0.3 mm; dn:18.3 mm; Basic dynamic load rating C:4.36 kN; Basic static load rating C0:1.86 kN; Fatigue load limit Pu:0.078 kN; Attainable speed for grease lubrication:63000 r/min; Attainable speed for oil-air lubrication:95000 r/min; Ball diameter Dw:4.762 mm; Number of balls z:10; Reference grease quantity Gref:0.357 cm³; Preload class A GA:27 N; Static axial stiffness, preload class A:39 N/µm; Preload class B GB:54 N; Static axial stiffness, preload class B:50 N/µm; Preload class C GC:108 N; Static axial stiffness, preload class C:66 N/µm; Preload class D GD:216 N; Static axial stiffness, preload class D:87 N/µm; Calculation factor f:1.02; Calculation factor f1:0.99; Calculation factor f2A:1; Calculation factor f2B:1.01; Calculation factor f2C:1.03; Calculation factor f2D:1.06; Calculation factor fHC:1.01; Calculation factor e:0.68; Calculation factor (single, tandem) Y2:0.87; Calculation factor (single, tandem) Y0:0.38; Calculation factor (single, tandem) X2:0.41; Calculation factor (back-to-back, face-to-face) Y1:0.92; Calculation factor (back-to-back, face-to-face) Y2:1.41; Calculation factor (back-to-back, face-to-face) Y0:0.76; Calculation factor (back-to-back, face-to-face) X2:0.67; Mass bearing:0.029 kg; |
| SHS35-2360L RAIL THK Linear Bearing,Linear Motion Guides,Global Standard Caged Ball LM Guide (SHS),Standard Rail (SHS) | Bearing number:7200 ACD/HCP4A; Size (mm):30x10x9; Bore Diameter (mm):30; Outer Diameter (mm):10; Width (mm):9; d:10 mm; D:30 mm; B:9 mm; d1:17.3 mm; d2:17.3 mm; D1:23.1 mm; r1,2 - min.:0.6 mm; r3,4 - min.:0.3 mm; a:9.3 mm; da - min.:14.2 mm; db - min.:14.2 mm; Da - max.:25.8 mm; Db - max.:27.6 mm; ra - max.:0.6 mm; rb - max.:0.3 mm; dn:18.3 mm; Basic dynamic load rating - C:4.4 kN; Basic static load rating - C0:1.9 kN; Fatigue load limit - Pu:0.078 kN; Limiting speed for grease lubrication:63000 r/min; Limiting speed for oil lubrication:95000 mm/min; Ball - Dw:4.762 mm; Ball - z:10; Gref:0.357 cm3; Calculation factor - e:0.68; Calculation factor - Y2:0.87; Calculation factor - Y0:0.38; Calculation factor - X2:0.41; Calculation factor - Y1:0.92; Calculation factor - Y2:1.41; Calculation factor - Y0:0.76; Calculation factor - X2:0.67; Preload class A - GA:27 N; Preload class B - GB:54 N; Preload class C - GC:108 N; Preload class D - GD:216 N; Calculation factor - f:1.02; Calculation factor - f1:0.99; Calculation factor - f2A:1; Calculation factor - f2B:1.01; Calculation factor - f2C:1.03; Calculation factor - f2D:1.06; Calculation factor - fHC:1.01; Preload class A:39 N/micron; Preload class B:50 N/micron; Preload class C:66 N/micron; Preload class D:87 N/micron; d1:17.3 mm; d2:17.3 mm; D1:23.1 mm; r1,2 min.:0.6 mm; r3,4 min.:0.3 mm; da min.:14.2 mm; db min.:14.2 mm; Da max.:25.8 mm; Db max.:27.6 mm; ra max.:0.6 mm; rb max.:0.3 mm; dn:18.3 mm; Basic dynamic load rating C:4.36 kN; Basic static load rating C0:1.86 kN; Fatigue load limit Pu:0.078 kN; Attainable speed for grease lubrication:63000 r/min; Attainable speed for oil-air lubrication:95000 r/min; Ball diameter Dw:4.762 mm; Number of balls z:10; Reference grease quantity Gref:0.357 cm³; Preload class A GA:27 N; Static axial stiffness, preload class A:39 N/µm; Preload class B GB:54 N; Static axial stiffness, preload class B:50 N/µm; Preload class C GC:108 N; Static axial stiffness, preload class C:66 N/µm; Preload class D GD:216 N; Static axial stiffness, preload class D:87 N/µm; Calculation factor f:1.02; Calculation factor f1:0.99; Calculation factor f2A:1; Calculation factor f2B:1.01; Calculation factor f2C:1.03; Calculation factor f2D:1.06; Calculation factor fHC:1.01; Calculation factor e:0.68; Calculation factor (single, tandem) Y2:0.87; Calculation factor (single, tandem) Y0:0.38; Calculation factor (single, tandem) X2:0.41; Calculation factor (back-to-back, face-to-face) Y1:0.92; Calculation factor (back-to-back, face-to-face) Y2:1.41; Calculation factor (back-to-back, face-to-face) Y0:0.76; Calculation factor (back-to-back, face-to-face) X2:0.67; Mass bearing:0.029 kg; |
| SSR20XV1SS BLOCK THK Linear Bearing,Linear Motion Guides,Radial Type Caged Ball LM Guide (SSR),SSR-XV Block | Bearing number:7200 ACD/HCP4A; Size (mm):30x10x9; Bore Diameter (mm):30; Outer Diameter (mm):10; Width (mm):9; d:10 mm; D:30 mm; B:9 mm; d1:17.3 mm; d2:17.3 mm; D1:23.1 mm; r1,2 - min.:0.6 mm; r3,4 - min.:0.3 mm; a:9.3 mm; da - min.:14.2 mm; db - min.:14.2 mm; Da - max.:25.8 mm; Db - max.:27.6 mm; ra - max.:0.6 mm; rb - max.:0.3 mm; dn:18.3 mm; Basic dynamic load rating - C:4.4 kN; Basic static load rating - C0:1.9 kN; Fatigue load limit - Pu:0.078 kN; Limiting speed for grease lubrication:63000 r/min; Limiting speed for oil lubrication:95000 mm/min; Ball - Dw:4.762 mm; Ball - z:10; Gref:0.357 cm3; Calculation factor - e:0.68; Calculation factor - Y2:0.87; Calculation factor - Y0:0.38; Calculation factor - X2:0.41; Calculation factor - Y1:0.92; Calculation factor - Y2:1.41; Calculation factor - Y0:0.76; Calculation factor - X2:0.67; Preload class A - GA:27 N; Preload class B - GB:54 N; Preload class C - GC:108 N; Preload class D - GD:216 N; Calculation factor - f:1.02; Calculation factor - f1:0.99; Calculation factor - f2A:1; Calculation factor - f2B:1.01; Calculation factor - f2C:1.03; Calculation factor - f2D:1.06; Calculation factor - fHC:1.01; Preload class A:39 N/micron; Preload class B:50 N/micron; Preload class C:66 N/micron; Preload class D:87 N/micron; d1:17.3 mm; d2:17.3 mm; D1:23.1 mm; r1,2 min.:0.6 mm; r3,4 min.:0.3 mm; da min.:14.2 mm; db min.:14.2 mm; Da max.:25.8 mm; Db max.:27.6 mm; ra max.:0.6 mm; rb max.:0.3 mm; dn:18.3 mm; Basic dynamic load rating C:4.36 kN; Basic static load rating C0:1.86 kN; Fatigue load limit Pu:0.078 kN; Attainable speed for grease lubrication:63000 r/min; Attainable speed for oil-air lubrication:95000 r/min; Ball diameter Dw:4.762 mm; Number of balls z:10; Reference grease quantity Gref:0.357 cm³; Preload class A GA:27 N; Static axial stiffness, preload class A:39 N/µm; Preload class B GB:54 N; Static axial stiffness, preload class B:50 N/µm; Preload class C GC:108 N; Static axial stiffness, preload class C:66 N/µm; Preload class D GD:216 N; Static axial stiffness, preload class D:87 N/µm; Calculation factor f:1.02; Calculation factor f1:0.99; Calculation factor f2A:1; Calculation factor f2B:1.01; Calculation factor f2C:1.03; Calculation factor f2D:1.06; Calculation factor fHC:1.01; Calculation factor e:0.68; Calculation factor (single, tandem) Y2:0.87; Calculation factor (single, tandem) Y0:0.38; Calculation factor (single, tandem) X2:0.41; Calculation factor (back-to-back, face-to-face) Y1:0.92; Calculation factor (back-to-back, face-to-face) Y2:1.41; Calculation factor (back-to-back, face-to-face) Y0:0.76; Calculation factor (back-to-back, face-to-face) X2:0.67; Mass bearing:0.029 kg; |
| SRS9X-55LM RAIL THK Linear Bearing,Linear Motion Guides,Miniature Caged Ball LM Guide (SRS),Miniature Rail (SRS-M) | Bearing number:7200 ACD/HCP4A; Size (mm):30x10x9; Bore Diameter (mm):30; Outer Diameter (mm):10; Width (mm):9; d:10 mm; D:30 mm; B:9 mm; d1:17.3 mm; d2:17.3 mm; D1:23.1 mm; r1,2 - min.:0.6 mm; r3,4 - min.:0.3 mm; a:9.3 mm; da - min.:14.2 mm; db - min.:14.2 mm; Da - max.:25.8 mm; Db - max.:27.6 mm; ra - max.:0.6 mm; rb - max.:0.3 mm; dn:18.3 mm; Basic dynamic load rating - C:4.4 kN; Basic static load rating - C0:1.9 kN; Fatigue load limit - Pu:0.078 kN; Limiting speed for grease lubrication:63000 r/min; Limiting speed for oil lubrication:95000 mm/min; Ball - Dw:4.762 mm; Ball - z:10; Gref:0.357 cm3; Calculation factor - e:0.68; Calculation factor - Y2:0.87; Calculation factor - Y0:0.38; Calculation factor - X2:0.41; Calculation factor - Y1:0.92; Calculation factor - Y2:1.41; Calculation factor - Y0:0.76; Calculation factor - X2:0.67; Preload class A - GA:27 N; Preload class B - GB:54 N; Preload class C - GC:108 N; Preload class D - GD:216 N; Calculation factor - f:1.02; Calculation factor - f1:0.99; Calculation factor - f2A:1; Calculation factor - f2B:1.01; Calculation factor - f2C:1.03; Calculation factor - f2D:1.06; Calculation factor - fHC:1.01; Preload class A:39 N/micron; Preload class B:50 N/micron; Preload class C:66 N/micron; Preload class D:87 N/micron; d1:17.3 mm; d2:17.3 mm; D1:23.1 mm; r1,2 min.:0.6 mm; r3,4 min.:0.3 mm; da min.:14.2 mm; db min.:14.2 mm; Da max.:25.8 mm; Db max.:27.6 mm; ra max.:0.6 mm; rb max.:0.3 mm; dn:18.3 mm; Basic dynamic load rating C:4.36 kN; Basic static load rating C0:1.86 kN; Fatigue load limit Pu:0.078 kN; Attainable speed for grease lubrication:63000 r/min; Attainable speed for oil-air lubrication:95000 r/min; Ball diameter Dw:4.762 mm; Number of balls z:10; Reference grease quantity Gref:0.357 cm³; Preload class A GA:27 N; Static axial stiffness, preload class A:39 N/µm; Preload class B GB:54 N; Static axial stiffness, preload class B:50 N/µm; Preload class C GC:108 N; Static axial stiffness, preload class C:66 N/µm; Preload class D GD:216 N; Static axial stiffness, preload class D:87 N/µm; Calculation factor f:1.02; Calculation factor f1:0.99; Calculation factor f2A:1; Calculation factor f2B:1.01; Calculation factor f2C:1.03; Calculation factor f2D:1.06; Calculation factor fHC:1.01; Calculation factor e:0.68; Calculation factor (single, tandem) Y2:0.87; Calculation factor (single, tandem) Y0:0.38; Calculation factor (single, tandem) X2:0.41; Calculation factor (back-to-back, face-to-face) Y1:0.92; Calculation factor (back-to-back, face-to-face) Y2:1.41; Calculation factor (back-to-back, face-to-face) Y0:0.76; Calculation factor (back-to-back, face-to-face) X2:0.67; Mass bearing:0.029 kg; |
| SRS15NUU BLOCK THK Linear Bearing,Linear Motion Guides,Miniature Caged Ball LM Guide (SRS),SRS-N Block | Bearing number:7200 ACD/HCP4A; Size (mm):30x10x9; Bore Diameter (mm):30; Outer Diameter (mm):10; Width (mm):9; d:10 mm; D:30 mm; B:9 mm; d1:17.3 mm; d2:17.3 mm; D1:23.1 mm; r1,2 - min.:0.6 mm; r3,4 - min.:0.3 mm; a:9.3 mm; da - min.:14.2 mm; db - min.:14.2 mm; Da - max.:25.8 mm; Db - max.:27.6 mm; ra - max.:0.6 mm; rb - max.:0.3 mm; dn:18.3 mm; Basic dynamic load rating - C:4.4 kN; Basic static load rating - C0:1.9 kN; Fatigue load limit - Pu:0.078 kN; Limiting speed for grease lubrication:63000 r/min; Limiting speed for oil lubrication:95000 mm/min; Ball - Dw:4.762 mm; Ball - z:10; Gref:0.357 cm3; Calculation factor - e:0.68; Calculation factor - Y2:0.87; Calculation factor - Y0:0.38; Calculation factor - X2:0.41; Calculation factor - Y1:0.92; Calculation factor - Y2:1.41; Calculation factor - Y0:0.76; Calculation factor - X2:0.67; Preload class A - GA:27 N; Preload class B - GB:54 N; Preload class C - GC:108 N; Preload class D - GD:216 N; Calculation factor - f:1.02; Calculation factor - f1:0.99; Calculation factor - f2A:1; Calculation factor - f2B:1.01; Calculation factor - f2C:1.03; Calculation factor - f2D:1.06; Calculation factor - fHC:1.01; Preload class A:39 N/micron; Preload class B:50 N/micron; Preload class C:66 N/micron; Preload class D:87 N/micron; d1:17.3 mm; d2:17.3 mm; D1:23.1 mm; r1,2 min.:0.6 mm; r3,4 min.:0.3 mm; da min.:14.2 mm; db min.:14.2 mm; Da max.:25.8 mm; Db max.:27.6 mm; ra max.:0.6 mm; rb max.:0.3 mm; dn:18.3 mm; Basic dynamic load rating C:4.36 kN; Basic static load rating C0:1.86 kN; Fatigue load limit Pu:0.078 kN; Attainable speed for grease lubrication:63000 r/min; Attainable speed for oil-air lubrication:95000 r/min; Ball diameter Dw:4.762 mm; Number of balls z:10; Reference grease quantity Gref:0.357 cm³; Preload class A GA:27 N; Static axial stiffness, preload class A:39 N/µm; Preload class B GB:54 N; Static axial stiffness, preload class B:50 N/µm; Preload class C GC:108 N; Static axial stiffness, preload class C:66 N/µm; Preload class D GD:216 N; Static axial stiffness, preload class D:87 N/µm; Calculation factor f:1.02; Calculation factor f1:0.99; Calculation factor f2A:1; Calculation factor f2B:1.01; Calculation factor f2C:1.03; Calculation factor f2D:1.06; Calculation factor fHC:1.01; Calculation factor e:0.68; Calculation factor (single, tandem) Y2:0.87; Calculation factor (single, tandem) Y0:0.38; Calculation factor (single, tandem) X2:0.41; Calculation factor (back-to-back, face-to-face) Y1:0.92; Calculation factor (back-to-back, face-to-face) Y2:1.41; Calculation factor (back-to-back, face-to-face) Y0:0.76; Calculation factor (back-to-back, face-to-face) X2:0.67; Mass bearing:0.029 kg; |
| SSR20XTB1SS BLOCK THK Linear Bearing,Linear Motion Guides,Radial Type Caged Ball LM Guide (SSR),SSR-XTB Block | Bearing number:7200 ACD/HCP4A; Size (mm):30x10x9; Bore Diameter (mm):30; Outer Diameter (mm):10; Width (mm):9; d:10 mm; D:30 mm; B:9 mm; d1:17.3 mm; d2:17.3 mm; D1:23.1 mm; r1,2 - min.:0.6 mm; r3,4 - min.:0.3 mm; a:9.3 mm; da - min.:14.2 mm; db - min.:14.2 mm; Da - max.:25.8 mm; Db - max.:27.6 mm; ra - max.:0.6 mm; rb - max.:0.3 mm; dn:18.3 mm; Basic dynamic load rating - C:4.4 kN; Basic static load rating - C0:1.9 kN; Fatigue load limit - Pu:0.078 kN; Limiting speed for grease lubrication:63000 r/min; Limiting speed for oil lubrication:95000 mm/min; Ball - Dw:4.762 mm; Ball - z:10; Gref:0.357 cm3; Calculation factor - e:0.68; Calculation factor - Y2:0.87; Calculation factor - Y0:0.38; Calculation factor - X2:0.41; Calculation factor - Y1:0.92; Calculation factor - Y2:1.41; Calculation factor - Y0:0.76; Calculation factor - X2:0.67; Preload class A - GA:27 N; Preload class B - GB:54 N; Preload class C - GC:108 N; Preload class D - GD:216 N; Calculation factor - f:1.02; Calculation factor - f1:0.99; Calculation factor - f2A:1; Calculation factor - f2B:1.01; Calculation factor - f2C:1.03; Calculation factor - f2D:1.06; Calculation factor - fHC:1.01; Preload class A:39 N/micron; Preload class B:50 N/micron; Preload class C:66 N/micron; Preload class D:87 N/micron; d1:17.3 mm; d2:17.3 mm; D1:23.1 mm; r1,2 min.:0.6 mm; r3,4 min.:0.3 mm; da min.:14.2 mm; db min.:14.2 mm; Da max.:25.8 mm; Db max.:27.6 mm; ra max.:0.6 mm; rb max.:0.3 mm; dn:18.3 mm; Basic dynamic load rating C:4.36 kN; Basic static load rating C0:1.86 kN; Fatigue load limit Pu:0.078 kN; Attainable speed for grease lubrication:63000 r/min; Attainable speed for oil-air lubrication:95000 r/min; Ball diameter Dw:4.762 mm; Number of balls z:10; Reference grease quantity Gref:0.357 cm³; Preload class A GA:27 N; Static axial stiffness, preload class A:39 N/µm; Preload class B GB:54 N; Static axial stiffness, preload class B:50 N/µm; Preload class C GC:108 N; Static axial stiffness, preload class C:66 N/µm; Preload class D GD:216 N; Static axial stiffness, preload class D:87 N/µm; Calculation factor f:1.02; Calculation factor f1:0.99; Calculation factor f2A:1; Calculation factor f2B:1.01; Calculation factor f2C:1.03; Calculation factor f2D:1.06; Calculation factor fHC:1.01; Calculation factor e:0.68; Calculation factor (single, tandem) Y2:0.87; Calculation factor (single, tandem) Y0:0.38; Calculation factor (single, tandem) X2:0.41; Calculation factor (back-to-back, face-to-face) Y1:0.92; Calculation factor (back-to-back, face-to-face) Y2:1.41; Calculation factor (back-to-back, face-to-face) Y0:0.76; Calculation factor (back-to-back, face-to-face) X2:0.67; Mass bearing:0.029 kg; |
SR25-580LY RAIL THK Linear Bearing,Linear Motion Guides,Radial Type Caged Ball LM Guide (SSR),Radial Rail (SR) for SSR Blocks Video
Thk Gk Rail Sr25 580Ly - Seagulls Industrial
Thk Gk Rail Sr25 580Ly. THK. MSRP: Was: Now: $816.48. (You save ). UPC: PRODUCT ID: SLK17234; Condition: New; Availability: Usually Ships in 1-2 Business ...
THK SR25-580LY RAIL from China manufacturer - DKS BEARING ...
Country: JAPAN · BRAND: THK · Model number: SR25-580LY · Stock: IN STOCK · Features: High precision · Accuracy: Please consult customer service for details ...
SR25-580LY RAIL THK Linear Motion Guide | Lily Bearing
Part Number, SR25-580LY RAIL. Rail type, Caged Ball Rail. Maximum length, 580 mm. Nominal rail size, 25 mm. Measurement standard, Metric.
THK SR25 Linear Guide System - Technico Inc
THK SR25 model actuator from Technico supports a large load and versatile functionality for a variety of ... Linear Guide System - SR25+2500LY RAIL ONLY.
THK SR25-580LY Rail Rail THK SSR Block - Lavaink Inks ...
This THK SR25-580LY Rail Rail is for SSR Block. ID: SR25-580LY Rail. Size: 25 mm. Rail Length: 580 mm. Pitch: 60 mm ...
SR25-580LY RAIL THK Radial Rail (SR) | BSPD Bearing ...
SR25-580LY RAIL ; Rail type, Caged Ball Rail ; Maximum length, 580 mm ; Nominal rail size, 25 mm ; Measurement standard, Metric ; Hardness, 58 to 64 HRC.