JAPAN NACHI Bearing
This Nachi 6304-2NSE ball bearing is made of chrome steel, is double sealed, and has C3 internal clearance. It has a 20 mm inside diameter, a 52 mm outside diameter, and a 15 mm depth. This single-row ball bearing has deep groove geometry for applications that require high speeds and support both radial and axial loads.
This Nachi 6308-2NSE ball bearing is made of chrome bearing steel and has rubber seals. It has a 40 mm inside diameter, a 90 mm outside diameter, and a 23 mm depth The bearing has deep groove geometry for supporting both radial and axial loads and high speeds.
’
- NACHI 5202-2RS C3 JAPAN Bearing 15*35*15.9
- Flange Block
- 0.0
- NACHI 51209 JAPAN Bearing 45*73*20
- 2.2500 in
- 20800 lbf
- NACHI 51206G JAPAN Bearing
- Two-Bolt Base
- Uncoated
- NACHI 51110 JAPAN Bearing 50×70×14
- 1.1875 in
- 2150 lbf
- NACHI 51105 JAPAN Bearing 25*42*11
- 12 mm
- 2150 lbf
- NACHI 51103 JAPAN Bearing 17*30*9
- 1.5000 in
- 3210 lbf
- NACHI 51101 JAPAN Bearing 12*26*9
- 16 mm
- Round
- NACHI 51100 JAPAN Bearing 10*24*9
- 0.5000 in
- 13500 lb
- NACHI 4T-30209 JAPAN Bearing 45*85*20.75
- 3.0000 in
- Sealed
- NACHI 40TAB09BFF/GM-P4 JAPAN Bearing
- 30 mm
- Without Snap Ring
- NACHI 40TAB09 BBFF JAPAN Bearing 40*90*20
- Flange Block
- 0.0
- 40 mm x 90 mm x 20 mm NACHI 40TAB09 JAPAN Bearing 40*90*20
- 0.8750 in
- 3150 lbf