JAPAN NACHI Bearing
This Nachi 6304-2NSE ball bearing is made of chrome steel, is double sealed, and has C3 internal clearance. It has a 20 mm inside diameter, a 52 mm outside diameter, and a 15 mm depth. This single-row ball bearing has deep groove geometry for applications that require high speeds and support both radial and axial loads.
This Nachi 6308-2NSE ball bearing is made of chrome bearing steel and has rubber seals. It has a 40 mm inside diameter, a 90 mm outside diameter, and a 23 mm depth The bearing has deep groove geometry for supporting both radial and axial loads and high speeds.
’
- NACHI 40TAB07-df JAPAN Bearing 40*72*15
- NACHI
- 40TAB07-df
- NACHI 40TAB07 DB/GMP4 JAPAN Bearing
- 2.3750 in
- 9000 lbf
- NACHI 40BCV09S1-2NSL JAPAN Bearing 40*90*23
- 1.2500 in
- 2150 lbf
- NACHI 4 T 462 / 4 T 453 JAPAN Bearing 57.15*104.775*30.162
- 85 mm
- 2150 lbf
- NACHI 38BVV07-30G JAPAN Bearing 38*72*33
- 6.3750 in
- 0.13 in
- NACHI 35TAB07NC1Y-GM P4F JAPAN Bearing 35*72*15
- NACHI
- 35TAB07NC1Y-GM P4F
- NACHI 35TAB07BFF (2SETS=8PCS) JAPAN Bearing 35*72*60
- 0.9375 in
- 3150 lbf
- NACHI 35TAB07BFF JAPAN Bearing 35 72 15
- 0.8750 in
- Sealed
- NACHI 35TAB07 DB/GMP4 JAPAN Bearing
- 1.9375 in
- 13900 lbf
- NACHI 35BCD08S6CS JAPAN Bearing 35*80*21/28
- Flange Block
- 1.0
- NACHI 33221 JAPAN Bearing
- 0.5000 in
- 10-32