JAPAN NACHI Bearing
This Nachi 6304-2NSE ball bearing is made of chrome steel, is double sealed, and has C3 internal clearance. It has a 20 mm inside diameter, a 52 mm outside diameter, and a 15 mm depth. This single-row ball bearing has deep groove geometry for applications that require high speeds and support both radial and axial loads.
This Nachi 6308-2NSE ball bearing is made of chrome bearing steel and has rubber seals. It has a 40 mm inside diameter, a 90 mm outside diameter, and a 23 mm depth The bearing has deep groove geometry for supporting both radial and axial loads and high speeds.
’
- 65 mm x 140 mm x 33 mm NACHI 21313EX1 JAPAN Bearing 65×140×33
- Two-Bolt Base
- 2.4688 in
- NACHI 21307EW33 JAPAN Bearing
- 3.0000 in
- Steel
- NACHI 20TAB04U/GM JAPAN Bearing 20*47*15
- 60 mm
- 168 kN
- NACHI 20TAB04 DB/GMP4 JAPAN Bearing 20*47*30
- Two-Bolt Base
- 6.5313 in
- NACHI 20234 M JAPAN Bearing 170*310*52
- 1.5000 in
- 2150 lbf
- NACHI 180BA JAPAN Bearing
- 1.3750 in
- 4-59/64 in
- 65 mm x 100 mm x 11 mm NACHI 16013 JAPAN Bearing 65*100*11
- 22 mm
- 24.5 N/mm2;Static 137 N/mm2
- 55 mm x 90 mm x 11 mm NACHI 16011 JAPAN Bearing 55*90*11
- Double-Row Filling Slot
- NACHI 120BA16 JAPAN Bearing 120x165x22
- 1.4375 in
- 2150 lbf
- NACHI 1.35BCV07S3 JAPAN Bearing 35X72X21
- 65 mm
- 4100 kgf kgf
- NACHI 031 BC 05 A2 JAPAN Bearing 30.6x 59x16.7
- 1.9375 in
- Set Screw