JAPAN NACHI Bearing
This Nachi 6304-2NSE ball bearing is made of chrome steel, is double sealed, and has C3 internal clearance. It has a 20 mm inside diameter, a 52 mm outside diameter, and a 15 mm depth. This single-row ball bearing has deep groove geometry for applications that require high speeds and support both radial and axial loads.
This Nachi 6308-2NSE ball bearing is made of chrome bearing steel and has rubber seals. It has a 40 mm inside diameter, a 90 mm outside diameter, and a 23 mm depth The bearing has deep groove geometry for supporting both radial and axial loads and high speeds.
’
- NACHI 5202ZZ JAPAN Bearing 15X35X15.9
- 3.2500 in
- 34400 lbf
- NACHI TA1820Z JAPAN Bearing 18*25*20
- 75 mm
- 2150 lbf
- NACHI NU306 JAPAN Bearing 30*70*19
- 1.0000 in
- 3-57/64 in
- NACHI IPH-6B-125-11 JAPAN Bearing
- 2.2500 in
- 11800 lbf
- NACHI DE6220CM JAPAN Bearing 100×180×34
- 0.9375 in
- 1420 lbf
- NACHI 6917ZZ JAPAN Bearing 85×120×18
- 20 mm
- 25 mm
- NACHI 6909ZZ JAPAN Bearing 45×68×12
- 1.5000 in
- 5-11/16 in
- NACHI 6204 2RS JAPAN Bearing 20X47X14
- 0.7500 in
- 2150 lbf
- NACHI 6009ZZ JAPAN Bearing 45×75×16
- 1.0000 in
- 4460 lb
- NACHI 6000 ZZE JAPAN Bearing
- 2.4375 in
- 18300 lbf
- NACHI 30TAB06U/GMP4 NACHI JAPAN Bearing 30*62*15
- 1.3750 in
- 5-5/64 in
- NACHI 53272 JAPAN Bearing 360X500X116.67
- 15 mm
- 975 kgf