JAPAN NACHI Bearing
This Nachi 6304-2NSE ball bearing is made of chrome steel, is double sealed, and has C3 internal clearance. It has a 20 mm inside diameter, a 52 mm outside diameter, and a 15 mm depth. This single-row ball bearing has deep groove geometry for applications that require high speeds and support both radial and axial loads.
This Nachi 6308-2NSE ball bearing is made of chrome bearing steel and has rubber seals. It has a 40 mm inside diameter, a 90 mm outside diameter, and a 23 mm depth The bearing has deep groove geometry for supporting both radial and axial loads and high speeds.
’
- NACHI 51208 JAPAN Bearing 40×68×19
- 8.0000 in
- 36940 lb
- NACHI 51205 JAPAN Bearing 25*47*15
- 1.6535 in
- 2.7559 in
- NACHI 51107 JAPAN Bearing 35×52×12
- 1.0000 in
- 2150 lbf
- NACHI 47675 JAPAN Bearing 71.438*133.35*16.669
- 1.5000 in
- 11570 lbf
- NACHI 32306 JAPAN Bearing
- Single Row Ball Bearing
- 0.0
- 20 mm x 47 mm x 18 mm NACHI 32204 JAPAN Bearing 20×47×19.25
- 3.0000 in
- Non-Expansion Bearing (Fixed)
- NACHI 30311 JAPAN Bearing
- 4.5000 in
- Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary Metals Industry, Steel Industry, Aluminum Industry, Pulp and Paper Industry, Che
- NACHI 30309 JAPAN Bearing
- 1.1875 in
- 3750 lbf
- NACHI 30210 JAPAN Bearing 50×90×21.75
- 90 mm
- 8.6300 in
- NACHI 30204 JAPAN Bearing 20*47*15.25
- 1.6875 in
- Non-Expansion Bearing (Fixed)
- NACHI 22212 JAPAN Bearing 60×110×28
- 1.0000 in
- 1-5/8 in
- 50 mm x 80 mm x 10 mm NACHI 16010 JAPAN Bearing 50×80×10
- 3-7/16 in
- Set Screw