JAPAN NACHI Bearing
This Nachi 6304-2NSE ball bearing is made of chrome steel, is double sealed, and has C3 internal clearance. It has a 20 mm inside diameter, a 52 mm outside diameter, and a 15 mm depth. This single-row ball bearing has deep groove geometry for applications that require high speeds and support both radial and axial loads.
This Nachi 6308-2NSE ball bearing is made of chrome bearing steel and has rubber seals. It has a 40 mm inside diameter, a 90 mm outside diameter, and a 23 mm depth The bearing has deep groove geometry for supporting both radial and axial loads and high speeds.
’
- NACHI 6203-2NSEC3 JAPAN Bearing 17x40x12
- 0.3750 in
- 9570 lb
- 17 mm x 40 mm x 12 mm NACHI 6203-2NSE9 JAPAN Bearing 17×40×12
- 65 mm
- -30 to +150 °C
- NACHI 6203 2NSE JAPAN Bearing
- Two-Bolt Base
- Non-Expansion Bearing (Fixed)
- NACHI 6203 ZZ JAPAN Bearing 17×40×12
- 2.0000 in
- 2150 lbf
- NACHI 6203 2RS JAPAN Bearing 17*40*12
- 8.0000 in
- Steel
- NACHI 6203 2NSE9 JAPAN Bearing 17x40x12
- 4.0000 in
- Non-Expansion Bearing (Fixed)
- NACHI 6203 2RS JAPAN Bearing 17×40×12
- 12 mm
- 44490 N
- NACHI 6202ZZ P5 JAPAN Bearing 15X35X11
- 0.2500 in
- 5370 lb
- 15 mm x 35 mm x 11 mm NACHI 6202NSE JAPAN Bearing 15*35*11
- 1.3750 in
- 1/2-20
- NACHI 6202-2NSL JAPAN Bearing 15×32×9
- 1.2500 in
- 2030 lbf
- NACHI 6202-2NSEC3 JAPAN Bearing 15×32×9
- 120 mm
- 106 kN