JAPAN NACHI Bearing
This Nachi 6304-2NSE ball bearing is made of chrome steel, is double sealed, and has C3 internal clearance. It has a 20 mm inside diameter, a 52 mm outside diameter, and a 15 mm depth. This single-row ball bearing has deep groove geometry for applications that require high speeds and support both radial and axial loads.
This Nachi 6308-2NSE ball bearing is made of chrome bearing steel and has rubber seals. It has a 40 mm inside diameter, a 90 mm outside diameter, and a 23 mm depth The bearing has deep groove geometry for supporting both radial and axial loads and high speeds.
’
- NACHI 6202-2NSE9CM JAPAN Bearing 15x35x11
- 3.9375 in
- Non-Expansion Bearing (Fixed)
- 15 mm x 35 mm x 11 mm NACHI 6202-2NSE9 JAPAN Bearing 15×35×11
- 3.4375 in
- 3.7500 in
- NACHI 6202 2NSE JAPAN Bearing 15*35*11
- 0.6250 in
- 17300 lb
- NACHI 6202 2z JAPAN Bearing
- 4.7244 in
- Standard Precision
- NACHI 6202 2RS/16*35 JAPAN Bearing 16 × 35 × 11
- 0.9375 in
- 52100 Steel
- NACHI 6202 2RS/15*35 JAPAN Bearing 15 × 35 × 11
- 75 mm
- 6750 kgf
- NACHI 6202 2RS JAPAN Bearing 15×32×9
- 1.4375 in
- Contact with Slinger
- NACHI 6202 2NSE9 JAPAN Bearing 15×32×9
- 1.0000 in
- 3150 lbf
- NACHI 6201-ZZE NR JAPAN Bearing 12×32×10
- 0.2500 in
- 2470 lbf
- 12 mm x 32 mm x 10 mm NACHI 6201ZE JAPAN Bearing 12×32×10
- 0.6250 in
- 1000 lb
- 12 mm x 32 mm x 10 mm NACHI 6201-2NSE9 JAPAN Bearing 12×32×10
- Pillow Block
- 0.0
- 12 mm x 32 mm x 10 mm NACHI 6201-2NSE JAPAN Bearing 12×32×10
- 2.9375 in
- 3.3800 in