JAPAN NACHI Bearing
This Nachi 6304-2NSE ball bearing is made of chrome steel, is double sealed, and has C3 internal clearance. It has a 20 mm inside diameter, a 52 mm outside diameter, and a 15 mm depth. This single-row ball bearing has deep groove geometry for applications that require high speeds and support both radial and axial loads.
This Nachi 6308-2NSE ball bearing is made of chrome bearing steel and has rubber seals. It has a 40 mm inside diameter, a 90 mm outside diameter, and a 23 mm depth The bearing has deep groove geometry for supporting both radial and axial loads and high speeds.
’
- NACHI 30TAB06DUGMP4 JAPAN Bearing
- 50 mm
- 2150 lbf
- NACHI 30TAB06DU/GM P4 JAPAN Bearing 30*62*15
- Plain Bearing Spherical Rod Ends
- 0.0
- NACHI 30TAB06DBGMP4 JAPAN Bearing 30*62*15
- 17 mm
- 1310 kgf
- NACHI 30TAB068FF JAPAN Bearing
- 2.751-18
- Stainless Steel
- NACHI 30TAB06 DB/GMP4 JAPAN Bearing
- T Water
- Click here
- 30 mm x 62 mm x 15 mm NACHI 30TAB06 JAPAN Bearing 30*62*15
- 130 mm
- 114.30 mm
- NACHI 30BGS1DS3 JAPAN Bearing
- 40 mm
- C3
- NACHI 30BG05S2G-2DS JAPAN Bearing 30*52*22
- 0.5000 in
- Without Snap Ring
- NACHI 30BCS36-2MT2N JAPAN Bearing 30*75*21
- 3.5000 in
- 32200 lbf
- NACHI 30BCS19-2NSLNR JAPAN Bearing 30*75*20
- 85 mm
- 3.7500 in
- 30 mm x 62 mm x 24 mm NACHI 30BCDS2 JAPAN Bearing 30*62*16
- 75 mm
- 11600 kgf
- NACHI 30308D JAPAN Bearing 40×90×25.25
- 12 mm
- 2150 lbf