JAPAN NACHI Bearing
This Nachi 6304-2NSE ball bearing is made of chrome steel, is double sealed, and has C3 internal clearance. It has a 20 mm inside diameter, a 52 mm outside diameter, and a 15 mm depth. This single-row ball bearing has deep groove geometry for applications that require high speeds and support both radial and axial loads.
This Nachi 6308-2NSE ball bearing is made of chrome bearing steel and has rubber seals. It has a 40 mm inside diameter, a 90 mm outside diameter, and a 23 mm depth The bearing has deep groove geometry for supporting both radial and axial loads and high speeds.
’
- 85 mm x 130 mm x 22 mm NACHI 7017 JAPAN Bearing 85×130×22
- 0.5000 in
- 7/8 in
- 45 mm x 68 mm x 12 mm NACHI 6909 JAPAN Bearing 45×68×12
- 1-1/4 in
- 50000
- 130 mm x 280 mm x 58 mm NACHI 6326 JAPAN Bearing 130*280*58
- 1.1875 in
- 2150 lbf
- 35 mm x 80 mm x 21 mm NACHI 6307 JAPAN Bearing
- 1.0000 in
- Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary Metals Industry, Steel Industry, Aluminum Industry, Pulp and Paper Industry, Che
- 30 mm x 72 mm x 19 mm NACHI 6306 JAPAN Bearing
- Bearings
- 0.0
- 25 mm x 62 mm x 17 mm NACHI 6305 JAPAN Bearing 25*62*17
- Wear Plate
- 6 in
- 20 mm x 52 mm x 15 mm NACHI 6304 JAPAN Bearing 20×52×15
- 1 in
- Maximum of +800 °F
- 15 mm x 42 mm x 13 mm NACHI 6302 JAPAN Bearing 15X42X13
- 50 mm
- 149.2 mm
- 160 mm x 290 mm x 48 mm NACHI 6232 JAPAN Bearing
- 75 mm
- 6750 kgf
- 50 mm x 90 mm x 20 mm NACHI 6210 JAPAN Bearing
- 2.2500 in
- 8150 lb
- 30 mm x 62 mm x 16 mm NACHI 6206 JAPAN Bearing 30×62×16
- 25 mm
- 1220 kgf